Habe die Change Log gefunden.
V19.10 Upgrade logs
1.After the capacity is set, the cycle capacity will no longer be cleared.
2.Added the function of zeroing the current, eliminating the zero drift current.
3.Add the function of low-temperature protection during discharge.
4.Increase the Re-Bulk SOC parameter, optimize the float charging logic, and remove the RFV timer. For detailed information, please refer to the video posted by Andy on YouTube.
5.Optimize the communication protocol of the energy storage display
-@2025-07-16 by JKBMS(JIKONG)
V19.11 Upgrade logs
1.The activation button can be used to adapt to both the self-locking button and the reset button simultaneously.
2.In the parallel mode, the current request margin has increased from 5% to 20%.
3.The overcurrent protection is increased by 2% to meet the requirements of some aging cabinets.
-@2025-07-29 by JKBMS(JIKONG)
V19.13 Upgrade logs
1.Add some reserved communication protocols..
2.Upgrade the LCD protocol and support 3.2-inch segmented display.
3.Upgrade the Bluetooth communication protocol to V2.0.
4.Update the Growatt CAN protocol.
5.Add support for LIN bus.
-@2025-09-18 by JKBMS(JIKONG)
Werde aber trotzdem Warten mit dem Update.
Edit Geht auch nicht zu Laden. Wie in Posts vorher schonmal erwähnt worden ist.