Eben auf Github hochgeladen…….Schoenes WE noch
** PV Eigenverbrauch Optimierung auf die billige Art **
“Grober Ohmpilot” fuer finanziell Minderbemittelte. Schaltet bis zu 4 Lasten an (4xShelly) wenn genug PV Ueberschuss vorhanden ist. Funktioniert mit Fronius, Shelly EM, SMA, Tasmota, Volkszähler, Kostal. Mit Arduino IDE auf ESP8266 (z.B. Wemos D1 mini) platform flashen. Ein AP (namens EK-xxxxx) wird unter 192.168.4.1 aufgemacht (password 12345678) . Verbinden, Wifi Kofiguration, Fronius IP, und Shelly IPs eintragen. Schaltwerte eintragen. Fertig.
**Achtung: Code ist noch etwas frisch, teilweise ungetested. Es kann also was schiefgehen.
Flash the firmware via Webbrowser (no Arduino IDE needed)
Hier ein Link zum Bin-File
Download the latest .bin file from the Releases page.
Connect a Wemos D1 Mini to your computer via USB.
Open Chrome or Edge and go to https://esp.huhn.me
Click Connect and select the Wemos COM port from the list.
Click Add file, set the address to 0x0, and select the .bin file.
Click Program and wait ~30 seconds until it says Done.
Unplug and replug the Wemos.